Annex Engineering Supernova Stepper Board KitMay 3, 2022
Metal Filament SpoolJuly 11, 2022
We’re not stopping
- .5mm orifice.
- Solid Tungsten Carbide for very high hardness for filaments filled with carbon, glass and more.
- High flow, backpressure reducing geometry.
- Non-stick surface finish on exposed faces.
- 6mm hex to be compatible with the Slice Engineering Mosquito Magnum+ nozzle shield.
- Designed to be V6 compatible, but also works with MK8.
- Designed in USA.
This nozzle requires hot tightening. Install the nozzle, heat hotend to 20c over desired use, and hand tighten with a 6mm or 1/4″ socket.
Boron Nitride paste use on the threads is recommended.
This product is by Rentable Socks#7689. Purchasing this item supports him directly.
|Dimensions||3 × 1 × 1 cm|